This website uses cookies to ensure you get the best experience on our website.

CP-YPS-PA24B-12DT NEW

12V 2Amp Power Adapter

  • Wide 110–265VAC input with stable 12V/2A, 24W output.
  • Low ripple performance ensuring clean and reliable power delivery.
  • Built-in OCP, 2kV Hi-Pot isolation & surge protection
  • ±5% line and load regulation for consistent output stability.
  • High operational efficiency up to 75% for energy-optimized performance.
Datasheet

Output Voltage: 12VDC, Range: 11.40 -12.60V, Min. Load: 0.1A, Rated Load: 2A, Output Power: 24W
Input Voltage Range 110-265VAC
Rated Frequency 50/60Hz Variation Frequency : 47 – 63Hz
Rated Input Voltage 140-240VAC
Input Current 0.75A Max.
Combined Load/ Line Regulation Voltage: 12VDC, Min. Load: 0.1A, Rated Load: 2A, Line Regulation: ± 5%, Load Regulation: ± 5%
Ripple and Noise 250mVp-p; Under normal voltage & nominal load
Turn on Delay Time 3S Max. @ 115V AC input and output Max. Load
Rise Time 100mS Max. @ 115V AC input and output Max. Load
Hold Up Time 8mS Min. @ 115V AC input and output Max. Load
Fall Time 50mS @ Max. Load
Surge Immunity 2kV L-N
Hi-Pot Test 2kV@ 10mA
Output voltage 11.4V – 12.6V
No Load Power Consumption <0.3W
OCP Power 2.2A min @ 230VAC
Efficiency Average efficiency 75% minimum @ 25%, 50%, 75% & 100% of full-loading and 230V AC input (After warm up 30 minutes)
Overshoot 10% Max. When power supply @ turns on or turn off
Operating Temperature 0°C to 40°C (Full load, Normal Operation)
Storage Temperature -40°C to 70°C
ok
Start Your Training