This website uses cookies to ensure you get the best experience on our website.

CP-ANW-HP4H2-6

4x Fast Ethernet PoE with 2x Fast Ethernet Uplink, Unmanaged

  • CCTV Extend: 1-4 ports support 250 meters long distance power supply (should be use cat5e or cat6 cable)
  • VLAN: Isolating ports 1-4 to each other can effectively suppress network storms and improve network performance
  • QOS: Prioritize the identified video data to make video transmission smoother
  • AI PoE: Automatic detection power of port, power off and restart the device
  • Support IEEE802.3af/at standard PD device
  • Support wireless access points (APs) and network surveillance cameras via Cat 5 cables
  • Supports uplink port auto-flip (Auto MDI/MDIX)
  • With power circuit protection, it can protect the security of the back-end equipment
  • Adopt store-and-forward exchange mechanism
Datasheet User Manual

Network Port 4 (10/100Mbps PoE RJ45 port ( Port 1~ port4) 2 (10/100Mbps RJ45 port uplink (Port5~port 6)
Network Standard IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at
PoE Pin 1/2+, 3/6-
Transfer Rate 100Mbps full Duplex, 10 or 100Mbps Half Duplex
Bandwidth 1.2Gbps (no block)
Network delay (100 to 100M bps) : maximum 20 μs (using 64 byte packet)
Frame Filter & Transmission Rate 10M port maximum 14,800pps 100M port maximum 148,800pps
LEDs Indicator Power, Link/Act , RESV , PoE Indicator light
Power Budget Internal power adapter: 60W
Single Port Max. 30W
Operating Temperature 0°C~40°C
Working Humidity 10%~90% (Non-condensing)
Power Source 100V~240V AC, 50/60Hz
Dimension 190mm(L) x 40mm (W) x 131mm(H)
Weight 1Kg
ok
Start Your Training