4 Ch. Eco Power Supply
Input voltage | 150V~240V AC |
Output Connector | Terminal Block Type |
Output voltage | 12V DC |
Current Range | 0-1A Each Channel |
Voltage Adj. Range | 12V DC - 15V DC |
Rated Power | 48W |
Ripple & Noise (max.) | <200mV |
Line Regulation | <3% at 150VAC-240VAC |
Voltage Tolerance | 10% |
Hold Up Time (Typ.) | 30ms max @ full load & 230Vac input turn of |
Setup Rise time | 30mS max @ rated load, output voltage from 10% to 90%. |
start time | 30mS max @ rated load, output voltage from 10% to 90%. |
Load Regulation | <10% at 150Vac-240Vac |
Linear modulate | SMPS (SMPS (Switch mode power supply) |
Temperature coefficient | Max 75 degree |
AC Current (Typ.) | 1.2A Max @ max 100-240Vac input & full load |
Efficiency (Typ.) | 70% |
Frequency Range | 50Hz-60Hz. Normal |
Leakage Current | 0.008 A Max. |
guard time | MAX 2Sec@ 150-240VAC at input & full load |
override protection | Supported |
Inrush Current (Typ.) | 50A max @ 240 Vac input & full load |
overvoltage protection | Supported |
short-circuit protection | Supported (AUTO RECOVERY) |
Over Load | Supported |
Over Current | Supported |
Isolation Resistance | 50MΩ min at primary to secondary add 500Vdc test voltage |
Withstand Voltage | Input (100 - 240)Vac/ Output (12 -15)Vdc |
Working temperature | -10°C to +45°C |
Store temperature | -40°C to +70°C |
Working Humidity | 5% to 95% |
Dimension | 154.7mm x 97.38mm x 32.90mm |
Body Type | Plastics ABS |
Weight | 219.1gm |