16GE + 2SFP Port PoE Switch With 16PoE Ports
PoE Ports | 16 PoE Ports |
Network Port | 16 x 100/1000 Mbps Base-T RJ45 ports (Data/Power) 2 x 1000 Mbps Base-X SFP port |
LED light | 16 x Link/Act LEDs 2 x SFP LED 1 x PoE-MAX LED 1 x Power LED |
PoE Standard | IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.3af/at |
Switch Capacity | 36Gbps |
Input Voltage | AC: 100-240V~50/60Hz |
PoE Power Supply | Ports 1-16 support standard IEEE802.3af/at 30W output per PoE port 230W output of the total PoE Power |
Forwarding Rates | 26.8Mpps |
Power Consumption | 250W output the whole device |
MAC Address List | 8K |
Four Modes | Standard: Default mode of the switch. In this mode, it works as an unmanaged switch; all ports can communicate with each other separately. Priority: In this mode, port15,16,SFP1,SFP2 serve as uplink ports, ports 1 – 8 serve as high priority port. All ports can communicate with each other separately. Extend: In this mode, data rate of ports 9 - 14 reduces to 10 Mbps, the maximum transmission distance can be 250 meters, and all ports can communicate with each other. VLAN: In this mode, ports 1 - 14 of the switch can communicate with port 14,15,SFP1,SFP2 separately, but cannot communicate with each other. You can enable this mode to reduce broadcast storm and isolate DHCP broadcast. |
Lightning Protection | ≥6KV |
Operating Temperature | 0°C ~ 45°C (32°F ~ 113°F) |
Operating Humidity | 10% ~ 90% non-condensing |
Storage Temperature | -40°C ~ 70°C (-40°F ~ 158°F) |
Storage Humidity | 5% ~ 90% non-condensing |
Dimension | 440mm x 178.8mm x 44mm |